Cars & Vehicles Auto Parts & Maintenance & Repairs

How to Operate a Bernzomatic 0x0 Cutting Torch 225

    • 1). Screw an oxygen cylinder into the larger of the two brass connections at the end of the 4-foot hose. Screw a MAPP gas cylinder into the smaller brass connection. Rest the cylinders on the 225's wire stand.

    • 2). Open the black plastic gas knob on the side of the gas connector 1/8 of a turn.

    • 3). Hold the cup of the 225's spark lighter over the end of the burner wand. Depress the handle of the spark lighter. This drags a flint across a knurled piece of steel to create a spark and ignite the gas.

    • 4). Open the gas valve until the flame does not give off black smoke.

    • 5). Open the black plastic oxygen valve on top of the oxygen connector slowly, until the flame loses its feather in the center and then further, until achieving the desired flame for the intended cutting operation.

    • 6). Perform the intended cutting operation.

    • 7). Close the oxygen valve when cutting is complete. Close the gas valve. Unscrew both the MAPP and oxygen cylinders.

Related posts "Cars & Vehicles : Auto Parts & Maintenance & Repairs"

Oil Pan Removal for a Chrysler Sebring

Maintenance

How to Change the Power Locks on a Jeep Grand Cherokee

Maintenance

Do it Yourself Windshield Replacement for a Mazda 626

Maintenance

How to Troubleshoot the Throttle Position Sensor on a Mercury

Maintenance

How to Change the Tailgate Lock on a C4

Maintenance

How to Change the Thermostat for a Dodge Truck

Maintenance

How to Measure With a Thickness Gauge

Maintenance

The Challenges Of Buying The Hankook Tires Online

Maintenance

Solar Technology RADAR Speed Monitor Specifications

Maintenance

Leave a Comment